Your scooter will have arrived on a pallet, secured with straps and wooden supports. Delivery can only be made kerbside so you may need to transport the scooter a short distance. If you anticipate this being an issue you can order some small dollies
The first step is removing the metal frame that surrounds the scooter, which is placed there to protect it during transit. The frame is held together by 30 nuts and bolts, three on both long sides along the top, five on both long sides along the bott
Now that the metal frame has been removed, it's time to take the protective wrapping off. It is easier with scissors, but can be done by hand if necessary. Once the wrapping has been removed you will be left with your scooter, as well as a cardboard
Included with the scooter in the wrapping is a cardboard box, open this up as it contains tools for later steps. Inside the box is a ziplock bag, which contains two spanners (one large and one small) and two hex keys (one large and one small). The sp
The scooter is secured to the frame at four points, on either side of each wheel, by metal wire. To detach the scooter can untwist the wire and then remove it. The wire is quite tough as well as sharp and we recommend using pliers (and if doing it by
The brakes come already setup, but need to primed for first use as well as checked and potentially adjusted. To prime the brakes for first use, fully apply the brakes several times. As you repeatedly apply the brakes you should notice them getting fi
To access the battery you need to open the seat. The seat release mechanism is underneath the seat, on the back left. Pressing it unlocks the seat and allows the seat to be lifted up. Underneath the seat you will find the battery, which needs to be i
Remove the plastic protector from the front light and adjust the light's angle to maximise forward visibility. Turning on the scooter and switching the front light to full beam will make it easier to find the best angle. If the light is loose it can
Please note this video is for the Max Golf, not the Max. Assembly for the Max finishes at 6:00 - you do not need to add the golf attachment.