4. Attaching the HandlebarsUpdated 5 months ago

Included with the tricycle, inside the rear seat, are a variety of tools, screws and components, with some loose and some inside a ziplock bag. The tools consist of two spanners (one large and one small) a screwdriver handle with two attachments and a large hex key. The spanners have different sized heads at each end, with the size marked by a number (8 and 10 on the smaller spanner, 12 and 14 on the larger).

To attach the steering column to the tricycle it must be attached in three places (see second image). Make sure the other two attachment points are in position before starting to tighten the screws.

Once the steering column is in position it can be screwed in. First are the two screws where the columns attach to the tricycle.

Then followed by the screws on the triangle shaped attachment.

Lastly the ring and cap need be applied.

Lastly the handlebars and screen need to be attached. These need to be done together. Put the handlebars in position (making sure they are the right way around), then put the handlebar holders on top, followed by the screen and finally put the screws through. Then tighten the screws (although not fully).