4. Attaching the HandlebarsUpdated a month ago

To attach the handlebars you will need the four short screws, the allen key and the handlebar bracket. Fit the handlebars into the groove on the steering column then put the handlebar bracket on top. Then put the four screws through the four holes and then tighten. 

Make sure you attach the handlebars the right way round (with the brake levers towards the front of the scooter). If you only put the screws in loosely, then you can adjust the handlebars to your preferred position before fully tightening the screws.

Once the handlebars are on, you can attach the headlight. Cut the zip tie attaching it to the handlebars, then unscrew the two screws on the bottom using the phillips screwdriver.

You can then attach it to the handlebars (over the top of the handlebar bracket), and then screw the two screws back in to tighten it.